piston chamber

英 [ˈpɪstən ˈtʃeɪmbə(r)]

美 [ˈpɪstən ˈtʃeɪmbər]

网络  活塞腔

英英释义

noun

• a chamber within which piston moves
  Synonym:cylinder

双语例句

• Compared with the traditional hydrostatic bearing structure, the area of slipper pair piston chamber is enlarged to ensure the formation of lubrication film while hydraulic motors starting, and a small diameter of damper is used to compensate the thermal viscidity effect.
  与传统的静压支承结构相比，增加了油室面积以保证液压马达启动时油膜的形成，采用合适直径的阻尼孔以补偿粘温效应。
• Heat is used to raise steam which either turns a turbine or forces a piston to move up and down in a cylinder. chamber, combustion, for turbojets or turbopropellers
  由热产生的水蒸气或者使涡轮旋转或者使活塞在气缸中上下运动。燃烧室，用于涡轮喷气发动机或涡轮螺旋桊发机
• This paper analyzes effects of the following parameters, such as the piston compression ratio, combustion chamber, injection pump, supercharger, injection nozzle coupling, medium-cooled temperature on exhaust from the angle of test.
  从试验的角度分析了柴油机的活塞压缩比、燃烧室、喷油泵、增压器、喷油嘴偶件、中冷温度等参数对排放的影响；
• The inner casing of one extraction back pressure steam turbine is a cylindrical structure, the dummy piston and the nozzle chamber combine into one entity, without central separating interface, the inner surface of said inner casing to be smooth, without steam seal gland.
  某台抽汽背压式汽轮机的内缸（平衡活塞与喷嘴室合为一体）为整体圆筒式结构，没有中分面，内缸内壁面为光面，没有汽封装置。
• The medium is sealed with the sealing piston on which there are both a grease chamber and an air chamber. The product can be fully sealed by means of absolute sealing of the air in the air chamber.
  由密封活塞来密封介质，密封活塞上有油脂室和空气室，通过绝对密封空气室内的空气来达到绝对密封油品的目的。
• Through mounting a floating piston to pneumatic spring cylinder, one chamber structure was changed into two chambers structure, which can reduce leakage and improve service life of pneumatic spring.
  气弹簧缸体内加装了一个浮动活塞，将一室结构变成了两室结构，将密封气变成了密封油，大大减少了泄露，提高了气弹簧使用寿命。
• An Experimental Research on Piston Durability in a Gasoline Engine with Jet-combustion Chamber
  射流燃烧室汽油机活塞耐久性的试验研究
• The crack and failure of aperture of larynx of piston combustion chamber can lead to the increasing trend with explosive pressure increasing, use FEA technology and engine durability test to research the crack effect of combustion chamber with the irregular shape structure of piston pinhole.
  针对活塞燃烧室喉口开裂失效随着爆发压力提高有所增加的趋势，利用FEA技术并结合发动机耐久试验进行了异形销孔结构对燃烧室开裂影响的研究。
• The ω-combustion chamber with small caliber ratio, small surface-volume ratio and leading wall of secondary spray is not very well to make use of oxygen above piston surface and in the upper portion of combustion chamber.
  对带有二次喷射导向壁面的小口径比和小径深比的ω型燃烧室，充分利用活塞顶面以上氧气的问题仍有待解决。
• Experimental Study on Optimization of Bowl-in-Piston Combustion Chamber for Spark Ignition Eng in es
  火花点火发动机碗型燃烧室的优化试验研究